Search for: All records

ABSTRACT In the framework of the ALOHA (Astronomical Light Optical Hybrid Analysis) project, we have implemented a fibre-linked interferometer connecting two telescopes of the CHARA (Center for High Angular Resolution Astronomy) array to the recombination beam facility using servo controlled hectometric outdoor fibres (240 m). During two consecutive nights, on-sky fringes at 810 nm were recorded on the star Vega (mag 0), with servo control of the fibre lengths. The optical path difference was set close to zero using internal fringes found before the on-sky observations. The repeatability of the delay line position offset between internal and on-sky fringes was less than 0.2 mm. The efficiency of the servo control systems has been demonstrated, leading to an enhancement of the signal-to-noise ratio from 68.9 with the servo off to 91.6 with the servo on. This result is a cornerstone for the ALOHA project goal of interferometry at 3.5 $$\mu$$m and a seminal step for the future kilometric infrared fibre-linked interferometer at CHARA. 

ABSTRACT In the framework of the Astronomical Light Optical Hybrid Analysis (ALOHA) laboratory mid-infrared (MIR) up-conversion fibred interferometer in the L band, we report on the influence of the input-stage architecture. Using an amplitude division set-up in the visible or near-infrared is a straightforward choice in most cases. In the MIR context, the results are slightly different and we show that a wavefront division set-up is needed. These in-laboratory principle experiments allow us to measure a reliable 88 per cent instrumental contrast with high flux and to obtain fringes from faint sources at 3.5 μm with a spectral bandwith of 37 nm converted to 817 nm. An equivalent limiting L-band magnitude around 3.9, equivalent to 3.0 fW nm−1, could be demonstrated on 1 m class telescopes. This opens the possibility of planning future on-sky tests at the Center for High Angular Resolution Astronomy (CHARA) array and of predicting the performance attained.